Our products

recommend

Enerpac RARH-Series Hollow Plunger Hydraulic Cylinders

Enerpac RARH-Series Hollow Plunger Hydraulic Cylinders

Lighter and shorter collapsed height than equivalent RACH single-acting models Double-acting for rapid retraction, regardless of hose lengths or system losses Built-in safety valve prevents accidental overpressurization Hollow plunger design allows for both pull and push forces Composite bearings increase cylinder life and side load resistance Hard coat finish on all surfaces resists damage and extends cylinder life Handles included on all models Floating center tube increases seal life Steel baseplate and saddle for protection against load-induced damage Integral stop ring prevents plunger over-travel and is capable of withstanding the full cylinder capacity CR400 coupler and dust cap included on all models All cylinders meet ASME B-30.1 standards

Enerpac RSM, RCS-Series, Low Height Hydraulic Cylinders

Enerpac RSM, RCS-Series, Low Height Hydraulic Cylinders

RSM-Series, Flat-Jac® Cylinders Compact hydraulic cylinder wtih a flat design for use where most other cylinders will not fit Single-acting, spring return RSM-750, 1000 and 1500 cylinders have handles for easy carrying Mounting holes permit easy fixturing Baked enamel finish for increased corrosion resistance CR-400 coupler and dust cap included on all models1) Hard chrome plated high quality steel plungers Grooved plunger ends require no saddle. RCS-Series, Low Height Cylinders Lightweight, low profile cylinder design for use in confined spaces Single-acting, spring return Baked enamel finish for increased corrosion resistance Plunger wiper reduces contamination, extending cylinder life CR-400 coupler and dust cap included on all models Grooved plunger end with threaded holes for mounting tilt saddles Integral handle on RCS-1002 for easy carrying Plated steel plungers.

EP3204JE-G, Electric Hydraulic Pump, 3,0 liters Usable Oil, Schuko CEE 7/7 Plug, with Gauge

EP3204JE-G, Electric Hydraulic Pump, 3,0 liters Usable Oil, Schuko CEE 7/7 Plug, with Gauge

Model: EP3204JE-G | ECCN: EAR99 | Harmonization: 8413500070 Series: E-Pulse | Product Line: Industrial Tools The Enerpac E-Pulse drives high productivity through its innovative design. Smart controls enable the motor to maintain constant power providing higher flow than traditional pumps. Adjustable speed control enables precision as required. E-Pulse is designed for convenience. Features include a cord management system and integrated pendant control with a magnet that fits securely into the handle of the pump. The durable aluminum housing is designed to give easy access for serviceability. E-Pulse is the heart to any hydraulic system, ensuring high performance and providing ultimate convenience.

EP3304SE-G, Electric Hydraulic Pump, 3,0 liters Usable Oil, Schuko CEE 7/7 Plug, with Gauge

EP3304SE-G, Electric Hydraulic Pump, 3,0 liters Usable Oil, Schuko CEE 7/7 Plug, with Gauge

Model: EP3304SE-G | ECCN: EAR99 | Harmonization: 8413500070 Series: E-Pulse | Product Line: Industrial Tools The Enerpac E-Pulse drives high productivity through its innovative design. Smart controls enable the motor to maintain constant power providing higher flow than traditional pumps. Adjustable speed control enables precision as required. E-Pulse is designed for convenience. Features include a cord management system and integrated pendant control with a magnet that fits securely into the handle of the pump. The durable aluminum housing is designed to give easy access for serviceability. E-Pulse is the heart to any hydraulic system, ensuring high performance and providing ultimate convenience.

P39, Single Speed, ULTIMA Steel Hydraulic Hand Pump, 672 cm3 Usable Oil

P39, Single Speed, ULTIMA Steel Hydraulic Hand Pump, 672 cm3 Usable Oil

Model: P39 | ECCN: EAR99 | Harmonization: 8413200000 Series: P | Product Line: Industrial Tools Ultima Steel Hand Pumps are durable, portable, and highly efficient. Each model in the series features an all-steel construction, a chrome plated plunger, and a wiper system for long-lasting performance. All except the P39 are 2 stage pumps, which reduces the number of handle strokes by as much as 78% compared to a single speed pump. This is ideal for applications when high flow is needed at the first stage, (such as when advancing a cylinder to the point of load contact). The pump switches automatically to the second stage which is the low flow high-pressure stage.

P392, Two Speed, Lightweight Hydraulic Hand Pump, 901 cm3 Usable Oil

P392, Two Speed, Lightweight Hydraulic Hand Pump, 901 cm3 Usable Oil

Model: P392 | ECCN: EAR99 | Harmonization: 8413200000 Series: P | Product Line: Industrial Tools Enerpac lightweight hydraulic hand pumps are a convenient alternative to heavier steel pumps without any sacrifice in performance or safety. Each model is rated up to 10,000 psi (700 bar). The durable glass-filled nylon reservoir and nylon encapsulated aluminum pump base offers an unrivalled combination of strength, weight, and resistance to corrosion.

PA133, Air Hydraulic Foot Pump, 589 cm3 Usable Oil, 0,13 l/m Oil Flow at 700 bar

PA133, Air Hydraulic Foot Pump, 589 cm3 Usable Oil, 0,13 l/m Oil Flow at 700 bar

Model: PA133 | ECCN: EAR99 | Harmonization: 8413500080 Series: PA | Product Line: Industrial Tools Enerpac PA Series Air Over Hydraulic Pumps are robust, simple to use, and easy to service. The series includes several models with varying reservoir capacities, air consumption, and maximum operating pressures. All models can be used either by foot or hand to advance and retract your single-acting hydraulic tool. The PA133 and PA1150 models also provide a hold capability.

FZ1612, High Pressure Fitting, Tee, 700 bar Maximum Operating Pressure, Connection from 3/8" NPTF Female to 3/8" NPTF Female

FZ1612, High Pressure Fitting, Tee, 700 bar Maximum Operating Pressure, Connection from 3/8" NPTF Female to 3/8" NPTF Female

Model: FZ1612 | ECCN: EAR99 | Harmonization: 7307995060 Series: FZ | Product Line: Industrial Tools Fitting are used for connecting hydraulic hoses, cylinders, components, power sources, tubes and gauges in a hydraulic system. Enerpac hydraulic fittings provide flexible, safe and leak-free connections.

Case study of hydraulic pump and power unit

Related to us

Papua New Guinea Railway Project

Hydraulic technology, with its powerful power transmission and precise control capabilities, has become the core support of engineering construction.
Hydraulic driven full section tunnel excavation
Papua New Guinea Railway Project

Delivery of multi section cylinders by Tianjin enterprises

This cylinder adopts core hydraulic technology to achieve high-precision synchronous extension and heavy-duty support of multi-stage cylinder blocks.
Hydraulic cylinders can accurately control the amplitude and speed of large loads
Delivery of multi section cylinders by Tianjin enterprises

About Us

Dezhou Shenghui Hydraulic Co., Ltd., established in 1999, is a leading manufacturer specializing in hydraulic equipment R&D, production, and sales, providing hydraulic and control system design, manufacturing, and technical services.

Our main products include: radial piston pumps, hand pumps, ultra-high pressure electric pumps, hydraulic torque wrench pumps, hydraulic jacks, complete hydraulic equipment, trenchless underground pipe jacking systems, hydraulic presses, and custom hydraulic actuators. We also provide complete engineering solutions tailored to customer needs.

  • With strict quality management and an experienced technical team,
  • our products are known for advanced technology, reliable quality, and durability, serving markets worldwide.
  • Shenghui Hydraulic continues to pursue excellence in manufacturing and looks forward to being your trusted partner.
4000 +
Satisfied Clients
1999 year
Date of establishment
20 +
exporting country
362 +
active employee
Circle Decoration Circle Decoration

Our Service Process

Customization is the core of our services

Requirements Communication

Gain a deep understanding of customer operating conditions, performance indicators, and customization requirements.

Design Proposal

The engineering team is responsible for the design, selection, and simulation optimization of hydraulic and electrical control system solutions.

Non-standard customization

Conduct product development and precision manufacturing according to the confirmed plan.

Delivery and guidance

Deliver on time and provide on-site or remote installation and commissioning guidance as well as operation training.

Why choose us?

We are not only a provider of equipment, but also a technical partner for the overall solution of hydraulic systems.

Choosing Shenghui means choosing a long-term commitment that stems from professionalism, quality, and loyalty to service.

Deep industry accumulation and professional background

Comprehensive technical research and system integration capabilities

Striving for excellence in manufacturing and quality control

Customer centered customized services

Global customer trust and reputation

Our Partner

test

Workshop demonstration

Our Work Environment, Production Process, and Company Updates

Market Research

Market Research

Market Research

Market Research

feel free to contact us

Get your exclusive solution now

0
Inquire for more cooperation or product information.
We will contact you within 1 working day, please check your email.
Name
Mail
Mobile phone
Message
Send

NewSite

We reply immediately
Welcome to our website. Ask us anything 🎉

Start Chat with: